Using Smart Slice

List of known limitations

  • Only one part can be analyzed. Multiple parts on the build plate are not allowed.

  • For printers with multiple extruders, only the 1st extruder is supported by Smart Slice. Make sure that extruder 1 is assigned to the model.

  • Only flat surfaces and cylinders can be selected for forces and anchors.

  • Supported Infill Pattern types are grid, triangles, and cubic. If Infill Density = 100%, Cura will set Top Layers = 0 and Bottom Layers = 999,999 which results in a part composed of only walls and layers. This scenario is supported by Smart Slice.

  • Supported Infill Density range = X% to X%

Next Gen Tools for Next Gen Parts

Get Started with Smart Slice

1938 E Harney Street, Laramie, WY 82072
1-307-314-2891   | 
 info@tetonsim.com

  • linked-in
  • twitter
  • youtube